Introducing The Weld It Yourself RADIUS Cage Kit For Your 2022+ Polaris PRO R 2 Seater! This Cage Is Built With .120" & .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle.
INCLUDES
18 Laser Cut Tube Pieces With Laser Etched Part Numbers On Each Component
1.75" OD .120 Wall DOM Tubing For The Main Bars and B-Pillar Tubes
1.75" OD .095 Wall DOM Tubing For Remainder 1.75” Tubes
1.25" OD .095 Wall DOM Tubing For Windshield Cross Bars
(2) A Pillar, (2) B Pillar & (2) C Pillar Bungs To Attach To OEM Cage Location
REQUIRES
Welding - This Kit Can Be Welded Together Once Configured On The Vehicle
UPGRADES
Aluminum Roof - .06 Thick Roof W/ Small Visor Bend - Complete With Weld On Tabs And 1/4" Grade 8 Hardware
Windshield Kit - Complete Bolt On Windshield Kit With .09" Powdercoated Black Aluminum Shroud With DOT Glass And Adjustable Air Vents
NOTES
This Cage Sits In Similar Fashion To OEM Cage, See Render With LSk Cage (Grey) Compared To OEM Cage (Blue)
Aluminum Roof Upgrade Is A Single Piece Of .06 Aluminum With A Slight Visor Bend Up Front To Match The Cage Radius
Must Use A Floor Jack Under Center Of Vehicle During Installation To "Level Out" The Frame Rails - Failure To Do So Will Make Aligning The Cage At The Factory Locations Difficult
This is a winter project all the weld's look good Fab work is nice. Only thing I found off so far is the the fan motor hole is a little tight for my RPM motor a little grinding will take care of that before send to powder coat desert tan. Thanks Mark
