Assault Industries Can-Am Maverick R High-Clearance Billet Aluminum Radius Arms
$1,249.95
Do More with Upgraded Radius Arms
Get ready for some serious off-roading adventures in your Can-Am Maverick R! With Assault Industries' High-Clearance Billet Radius Arms, you're set to conquer rough terrain like never before. These Maverick R radius arms are built tough with billet aluminum, and give you the extra clearance you need to roll over logs and rocks you avoided in the past. Once you get these Can-Am radius rods installed, you’ll leave your buddies choking on your dust.
6061 Billet Aluminum
We make these radius arms from 6061 billet aluminum—they’re super strong yet lightweight. That means these rods won't weigh your ride down, but they'll still hold up against tough conditions and big bumps. And with their anodized black coating, they're ready to take on anything, no matter how extreme!
High-Clearance Bends Let You Do More
Thanks to their clever design, these radius arms have special bends and hug closer to the bottom of your vehicle, staying further away from the ground. This means they're less likely to get caught on rocks and sticks that might have snagged your old suspension.
Heims with 3/4” Threads
One of the weakest parts of your suspension is the heim joints. That’s why Assault Industries uses 3/4” chromoly steel. They hold up to your style of riding and allow you to adjust your camber, minimizing tire wear.
Maverick R Radius Arms That Look Badass
The design of these boxed radius arms gives a distinctive appearance. They’re also complemented by the Assault badge, adding a sleek, polished look to your machine. The design of these boxed radius arms gives a distinctive appearance. They’re also complemented by the Assault Industries badge, adding a sleek, polished look to your machine.
Add a Radius Arm Nut Weld Plate The welded-on nuts your stock radius arms use can break off easily whenever you tighten your bolts. Once they break, they’re practically impossible to reinstall because of the limited space. Add a Radius Arm Nut Weld Plate to make it easy. It slides right in and replaces all the nuts with a solid frame.
Get ready for some serious off-roading adventures in your Can-Am Maverick R! With Assault Industries' High-Clearance Billet Radius Arms, you're set to conquer rough terrain like never before. These Maverick R radius arms are built tough with billet aluminum, and give you the extra clearance you need to roll over logs and rocks you avoided in the past. Once you get these Can-Am radius rods installed, you’ll leave your buddies choking on your dust.
- Constructed of 6061 billet aluminum
- High-clearance bends for enhanced maneuverability
- 3/4” heims with chromoly steel bushings
- Iconic look
- Add a Radius Arm Weld Plate for easier installation
6061 Billet Aluminum
We make these radius arms from 6061 billet aluminum—they’re super strong yet lightweight. That means these rods won't weigh your ride down, but they'll still hold up against tough conditions and big bumps. And with their anodized black coating, they're ready to take on anything, no matter how extreme!
High-Clearance Bends Let You Do More
Thanks to their clever design, these radius arms have special bends and hug closer to the bottom of your vehicle, staying further away from the ground. This means they're less likely to get caught on rocks and sticks that might have snagged your old suspension.
Heims with 3/4” Threads
One of the weakest parts of your suspension is the heim joints. That’s why Assault Industries uses 3/4” chromoly steel. They hold up to your style of riding and allow you to adjust your camber, minimizing tire wear.
Maverick R Radius Arms That Look Badass
The design of these boxed radius arms gives a distinctive appearance. They’re also complemented by the Assault badge, adding a sleek, polished look to your machine. The design of these boxed radius arms gives a distinctive appearance. They’re also complemented by the Assault Industries badge, adding a sleek, polished look to your machine.
Add a Radius Arm Nut Weld Plate The welded-on nuts your stock radius arms use can break off easily whenever you tighten your bolts. Once they break, they’re practically impossible to reinstall because of the limited space. Add a Radius Arm Nut Weld Plate to make it easy. It slides right in and replaces all the nuts with a solid frame.
- Made of 6061 billet aluminum
- High clearance for enhanced maneuverability
- 3/4” adjustable heim joints
- Zinc-plated chromoly steel bushings
- Excellent strength-to-weight ratio
- Complete, bolt-on kit
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.