:: ENGINEERING ADVENTURE ::
FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE
FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE
FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE
FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE
FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE
FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE
FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE
FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE

FastLab

FASTLAB SPARE TIRE CARRIER / STORFAST MOLLE PLATE PACKAGE

+

STORFAST MOLLE PLATE CURRENTLY IN PRODUCTION

Save money when you buy them together!

2016-2020 FastLab YXZ spare tire carrier. This spare tire carrier mounts to the rear factory frame section. Because of this, it will work with all aftermarket cages that retain the factory frame section. The position of the wheel and tire is intentionally over the back of the car as it moves the Center of Gravity rearward to reduce the YXZ's tendency to buck in the rear.  It can fit up to a 32" tire on any backspacing of wheel, and has both 4x110 and 4x156 bolt patterns.

Expand the functionality of your FastLab Spare Tire Carrier or other 2" receiver hitch with the StoreFast MOLLE plate modular system. The MOLLE pattern can hold up to 50lbs of extra gear. The 2" square tubing fits into any standard receiver hitch and held in with the provided hitch pin. Product comes in black textured powder coating.

The plate is configured to hold a Rotopax mount in 4 different positions. It also accepts quickfist clamps, KC cyclone lights, MyMedic first aid kits, and nearly any other accessories with an almost infinite number of mounting options. The plate can be mounted in the vertical or horizontal position.

Compatibility:

•FastLab 2016+ Yamaha YXZ Rear Spare Tire Carrier (2" Receiver Hitch)

•Works with stock, 6+1, 5+2 and 4+3 offset

•REQUIRES 2.75" Center Bore in your wheel

NOTE: Since the hub mount accommodates both YXZ bolt patterns, the customer is required to install the supplied wheel studs.  The recommended method is to use a press.  The next best option is the Lisle 22800 wheel stud installer or simply an M12 x 1.5 Nut and washers to pull the stud in.  If you are uncomfortable with the wheel stud installation, take the tire carrier to your local mechanic. Requires minor trimming of bed section.

MAXIMUM TOTAL WEIGHT CAPACITY OF THE TIRE CARRIER = 100 lbs